Welding

Please follow the steps below to do welding.

1. Turn on the machine.
   Refer to Turn on the Machine for more information.

2. Prepare and fix the workpieces.
   Set the safety clip on the workpiece or the working table which must be electrically conducted with the workpieces.

   IMPORTANT

   The safety clip must be electrically conducted with the workpieces, otherwise, the laser would NOT be fired.

   
   

3. Set welding parameters.
   Click on the Process library button on the main UI of the welding mode.

   
   

   In the welding parameters library UI, set material type and thickness, and then click on the Export button to confirm the selection.

   
   

4. Set the machine to the READY state.
   Click on the Auto feeding button, click on the Wobble button, click on the Laser button, and then click on the Lock button, to set the machine to the READY state.

   
   

5. Put on the protecting glasses.

   WARNING

   The protecting glasses MUST be worn properly to avoid eyes hurting.

   
   

6. Aim the welding gun to the start position of welding.

   
   

7. Press and hold the trigger, and then move the welding gun smoothly along the welding path.

   
   

8. Release the trigger while the welding gun is moved across the end position of welding.

9. Set the machine to the IDLE state.
   Click on the Lock button, click on the Laser button, click on the Wobble button, and then click on the Auto feeding button, to set the machine to the IDLE state.