Unpacking

Follow the steps below to unpack the MAX fiber laser.

1. Secure the wood crate on the ground.

   
   

2. Unlock and remove the top.
   Unlock the clips by a flathead screwdriver.

   
   

   NOTE

   Keep all the clips in case of repacking and returning the laser.

3. Remove the protecting bar and foam.

   
   

4. Unlock and remove the sides.
   At least remove a long side to get the laser out.

   
   

5. Remove the fixing straps, film and accessories.

   
   

   NOTE

   Keep the straps and film in case of repacking and returning the laser.

6. Take out the laser by a forklift or a crane and secure it in position.

   
   

Check the laser and accessories according to the packing list. Contact us immediately if there is anything missing or damaged.

NOTE

Keep the wood crate in case of repacking and returning the laser.