Introduction

How to Use This User’s Manual

Thank you for purchasing a GU Eagle laser system coming with the RDCMarkVision CAM software. RDCMarkVision has been designed to be easy to use, but you will utilize it to its fullest potential by taking some time to read this user’s manual prior to use. You will be ready to use the software as soon as you read the first few sections. Then you can refer to topics in the remaining sections, as you work.

Notes Used in This Manual

Look for these kinds of notes to help you find valuable information throughout the text:

NOTE

Helpful notes to keep in mind while running the laser!

IMPORTANT

Important instructions you should always follow.

WARNING

Warnings and cautions to keep in mind while running the laser.

Difference between RDCMarkVision and RDWorks

RDCMarkVision provides a subset CAD/CAM functions of RDWorksV8 with additional camera positioning capability, is dedicated for the camera positioning cutting which can only work on the specific laser controller and hardware. Always use RDWorksV8 for general cutting.